Main Profile

At A Glance

How to Install the Teton Patio Cover - Part 2

Hammer the concrete anchors into a firm position. Place the post on top of the bracket. Do the same for the other post. For additional posts, mark the height on the post and then cut to fit. Make sure the spaces between the posts are even before cutting. Keep the wrapper on when cutting to help prevent scratching. Attach the brackets to the posts on both sides. Attach the posts to the beam on both sides. Secure the lower brackets for the posts as shown before. Attach each bracket to its respective post. Tighten the awning rail firmly to the roof panels. Step 5 -- Putting Up the Roof Panels Snap or slide the roof panels onto each other. Attach on each side. Always measure each panel to make sure the panels are level. Do not forget to insert a Styrofoam flashing plug in each panel. Step 6 -- Installing the Gutter and Fascia Attach the gutter to the roof panels. Attach the side fascia to the roof panel. Attach the corner cap. Do the same for the opposite side. Shop patio covers at Lowe's: http://www.lowes.com
Length: 04:53

Contact

Questions about How to Install the Teton Patio Cover - Part 2

Want more info about How to Install the Teton Patio Cover - Part 2? Get free advice from education experts and Noodle community members.

  • Answer

Ask a New Question