Main Profile

At A Glance

Installing the Aluma Vent Awning Door Canopy - Part 2

This is part 2 of the instructional video from Lowe's for assembling your Aluma Vent Awning Door Canopy. Step 6 -- Attaching Bottom Pans Pick out the bottom pans. These are the ones with the holes at the top and the rectangular holes at the bottom. Align the holes and attach each pan. Bend the valance down. Step 7 -- Attaching the Apron Bar Attach the apron bar by placing hooks inside the rectangle holes on all the pans. Step 8 -- Installing the Clips Hook one side of the clip onto the runner. Squeeze the runner and snap the clip into place. See the manual for more information. Install all of the clips. Squeeze the retainers down on the pans firmly. Step 9 -- Installing the Top Covers Bend the valance of the top covers, snap over the clips and then slide in. Attach each valance to the apron bar hooks. Mark the length of the awning on the wall and then drill in screws for hanging. Hang the assembled canopy. Attach the flashing to the wall using screws. Attach the wall bracket securely to the wall. Caulk along the wall and flashing to prevent leaks. Shop door awnings at Lowe's: http://www.lowes.com
Length: 03:46

Contact

Questions about Installing the Aluma Vent Awning Door Canopy - Part 2

Want more info about Installing the Aluma Vent Awning Door Canopy - Part 2? Get free advice from education experts and Noodle community members.

  • Answer

Ask a New Question