Main Profile

At A Glance

Vinyl Fence Installation Tips: Installing Posts and Panels

After setting the dimensions and digging post holes for your vinyl fence, it is time to insert the posts and panels. First, find out which side you need to place the fence brackets on. Mark and attach with screws. If you are using a stair step method of fencing, adjust the screws accordingly. Also note with this vinyl post it is required to have a 4"x4" post inside for stability. After setting up the brackets, you can begin to lay your first vinyl fence post. Place a bed of gravel in the post hole for drainage and then set the post against your layout measurements with a clamp. Follow up by filling the hole with concrete. Make sure you don't completely fill the hole, as you might want to place soil on top later. Once the cement is set, put the vinyl fence panel in place. Use a post level to make sure the post is even. Then, you can continue your fence by sliding the posts into the panels and attaching with screws. Finish off with concrete in each post hole. If you would like to learn how to attach a fence gate or need the printable instructions for this video, visit http://www.Lowes.com/Videos. Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_center?add_user=lowes Or head to our channel: http://www.youtube.com/Lowes
Length: 03:39

Contact

Questions about Vinyl Fence Installation Tips: Installing Posts and Panels

Want more info about Vinyl Fence Installation Tips: Installing Posts and Panels? Get free advice from education experts and Noodle community members.

  • Answer

Ask a New Question