Main Profile

At A Glance

DIY - Grid Tie Performance Test Verification Part 1 - Begin Test

This video begins a series of videos verifying my earlier results with my Grid Tie inverter running off a 24v battery bank. I started documenting my initial data around 8:30 a.m. or so and turned on the GTI around 8:41 a.m. The purpose is to show that using a large battery bank and adequate power coming into the system, someone could feasibly use the battery bank as a buffer connected to the GTI to achieve greater efficiency from the unit. The videos will show hour by hour power characteristics of power from the battery bank and Watts going back into the home via the GTI. Beginning stats as I recorded them are: Beginning Voltage: 28v Beginning State of Charge (SoC): 100%
Length: 04:42

Contact

Questions about DIY - Grid Tie Performance Test Verification Part 1 - Begin Test

Want more info about DIY - Grid Tie Performance Test Verification Part 1 - Begin Test? Get free advice from education experts and Noodle community members.

  • Answer

Ask a New Question