Main Profile

At A Glance

How To Create a Zoetrope

Watch more Animation Techniques videos: http://www.howcast.com/guides/2-Animation-Techniques Subscribe to Howcast's YouTube Channel - http://howc.st/uLaHRS For a fun novelty project, learn how to make a zoetrope at home with these easy instructions from Howcast. Howcast uploads the highest quality how-to videos daily! Be sure to check out our playlists for guides that interest you: http://howc.st/ytmainplaylists Subscribe to Howcast's other YouTube Channels: Howcast Health Channel - http://howc.st/HOE3aY Howcast Video Games Channel - http://howc.st/tYKKrk Howcast Tech Channel - http://howc.st/rx9FwR Howcast Food Channel - http://howc.st/umBoJX Howcast Arts & Recreation Channel - http://howc.st/vmB86i Howcast Sports & Fitness Channel - http://howc.st/vKjUjm Howcast Personal Care & Style Channel - http://howc.st/vbbNt3 Howcast empowers people with engaging, useful how-to information wherever, whenever they need to know how. Emphasizing high-quality instructional videos, Howcast brings you experts who provide accurate information in easy-to-follow tutorials on everything from makeup, hairstyling, nail art design, and soccer to parkour, skateboarding, dancing, kissing, and much, much more. Step 1: Plan the animation Plan out your animation. Assume there will be about 12 cells, or steps. Tip The best animations for a zoetrope are cyclical, like a man walking, or a sun rising and setting. Step 2: Place the lid flat side down Place the can lid flat side down. Step 3: Roll white paper into a tube and place into lid Gently roll the white paper into a tube and place it into the lid, so that the rim of the lid supports the tube of paper. You will have a drum with an open end and the lid as the bottom. Step 4: Mark where the inside edge overlaps the paper Use the pencil to lightly mark where the inside edge overlaps the inside of the white paper. Step 5: Measure the white paper Lay the white paper flat and measure the distance from the inside edge of the sheet to the mark. This will be the longer distance to the mark you made. Step 6: Divide by the number of steps in your animation Divide the distance by 12 — or the number of steps in your animation — and mark a light line at the bottom edge of the paper to divide each cell. Step 7: Sketch out the animation Sketch out your animation, beginning at the left cell and moving right along each cell. Step 8: Return the paper to the lid Gently re-roll the white sheet and place it back into the lid to make sure all of your cells will be shown. Step 9: Place black paper flat with white paper on top Place the black paper flat with the white paper on top and flush along the long edge. Make sure the light lines you made in Step 6 run along the middle of the black sheet. Step 10: Draw a line down the length of the black paper Use the edge of the white paper to draw a line down the length of the black paper. It will run down the middle. Step 11: Continue the marks you made onto the black sheet Continue the marks you made on the white sheet onto the black sheet. They should intersect the long line you made in Step 9. Step 12: Move the white sheet Move the white sheet to 1/8" inside of the opposite edge of the black sheet. Step 13: Extend the lines Extend the lines again from the white sheet to the edge of the black sheet. Remove the white sheet. Tip The sets of small lines you copied on to the black sheet should line up all the way down the black sheet. Step 14: Connect the sets of marks Use the ruler and pencil to connect the sets of marks you made on the black sheet. Step 15: Cut windows Using the lines you made in Step 13 as guides, cut windows out of the black sheet with craft knife. The windows should start in the middle, run about 1" down the line and be about 1/8" wide. Step 16: Cut an X in the lid's center Carefully find the center of the lid and cut a 3/8"-wide X in the top. Step 17: Run a bead of glue on the inside of the lid's lip Run a light bead of glue along the inside edge of the lid's lip. Step 18: Roll the black paper and place it in the lid Gently roll the black sheet and place it in the lid so that the slits are furthest away from the lid. Step 19: Push the black paper against the glue and let dry Gently press the black paper out against the lid's lip so that it bonds to the glue on the lid. Set aside to dry. Step 20: Poke the pencil down through the X Poke the pencil down through the X you had cut so that it sticks out the bottom. Tip The brass eraser holder should snag on the cut edges of the lid's X. Step 21: Roll the white sheet and place inside the drum Gently roll the white sheet and place it inside the drum so the bottom of the animation rests on the lid. Step 22: Rotate the drum Clasp the pencil between your palms and slowly rota
Length: 03:33

Contact

Questions about How To Create a Zoetrope

Want more info about How To Create a Zoetrope? Get free advice from education experts and Noodle community members.

  • Answer

Ask a New Question